C O N T A C T

FREQUENTLY ASKED QUESTIONS

 

1. How to Upgrade software and Channel in IPTV Models?

2. How to Connect IPTV Receiver's Models to the Internet (Ethernet Config)?

3. How to Connect IPTV Receiver's Models to the dongl (Super Setting)?

4. How to Connect IPTV Receiver's Models to the Icam/Intenet (Super Setting)?

5. How to Connect IPTV Receiver's Models to the IPTV (Super Setting)?

6. How to Reboot IPTV Receiver's Model?

7. Information of Network Center









Answers

1. How to Upgrade software and Channel in IPTV Models?

First you must have the software and channel with .bim file format you can download from Link then use it by USB (Flash Memory) insert to your Receiver, Press Menu Bottom in Remote Control go to Upgrade, Press OK, Find Upgrade by USB, Press OK, then first you must upgrade the Softwae after restart automaticly of Receiver do same steps for upgrade the Channels... Top





2. How to Connect IPTV Receiver's Models to the Internet (Ethernet Config)?

you can easy find with two way Press F1 - 555 OR in Menu Internet find (Ethernet Config)
in the Link Type Select the which type of internet you have (Wire Network - WIFI Network - 3G Network - GPRS Network)
1- For the Wire Network direct use it
2- For the WIFI Network you must find your WIFI in Search type your password and selsect the auto Link press Link
3- For 3G Network you can direct use it by USB with 3G Internet's
4- For GPRS Network it just can use it in X60000 Model or if you have the Dongl of GPRS, in search let the auto Mode and select the auto link press the Blue Bottom... Top





3. How to Connect IPTV Receiver's Models to the dongl (Super Setting)?

you can easy find with two way Press F1 - 111 OR in Menu Upgrade find (Super Setting)
find SatSharing(Internal) press blue Bottom but be carfull at first you must have the Segnal of the dish moon dongl... Top





4. How to Connect IPTV Receiver's Models to the Icam/Intenet (Super Setting)?

you can easy find with two way Press F1 - 111 OR in Menu Upgrade find (Super Setting)
find ICAM press blue Bottom but be carfull at first you must connected to the Internet then press ok in
and some time because of bad signal of your internet ICAM didin't connect to the Internet in side ICAM you must press yellow and press 0-0-0-0 for reconnecting ICAM... Top





5. How to Connect IPTV Receiver's Models to the Icam/Intenet (Super Setting)?

you can easy find with two way Press F1 - 111 OR in Menu Upgrade find (Super Setting)
find IPTV press blue Bottom but be carfull at first you must connected to the Internet then press ok in...
Top





6. How to Reboot IPTV Receiver's Models ?

some time when you Scaning the channel or upgrade the software or channels turn off the Electric or any damg in Electrinc your receiver gone to Boot you must reboot it...
first you must have the software of your type of reciver becarfull change the name (rename) .bim file to (rom), use it by USB (Flash) and turn off/on your receiver directly press Menu bottom in remote control 2-3 times automaticly reboot the receiver.
after that you must upgrade the channels because the flash channel of your receiver is empty Top





7. Information of Network Center

some time when you Scaning the channel or upgrade the software or channels turn off the Electric or any damg in Electrinc your receiver gone to Boot you must reboot it...
Top